Pintura Inox
It is an antioxidant coating formulated to protect any metallic surface, providing it with an appearance similar to stainless steel.
PINTURA INOX
It is an antioxidant coating formulated to protect any metallic surface, providing it with an appearance similar to stainless steel.
- Paint rich in stainless steel. Does not contain zinc or lead.
- Protects surfaces from abrasion and corrosion.
- Dries quickly. Adheres perfectly to the surface.
- Resists occasional temperatures up to 270 º C. Reaches 100 º C in a continuous operation.
Application Areas
As finish for outdoor and indoor metal surface protection. Structural steel, industrial vehicles, metal storage tanks, welding joints, metal fences, farms, coastal facilities, stainless steel constructions. Can be applied on plastics and polyesters, applying an anchorage coat.
Instructions for use
Apply on clean and dry surfaces. Remove embedded dirt and rust residues by brushing using steel rakes. Apply one or two thin coats of PINTURA INOX. It is advisable to apply three thin coats rather than a single thick coat. Can be repainted after 10 minutes. Shake the aerosol before use, about one minute after hearing the mixer noise.
Place the spray upside down to purge the valve after use, replace the diffuser if clogged. Bulk, apply with brush or gun. Dilute if necessary using DISOLVENTE PI.
Do not apply to equipment while plugged in and use in well ventilated areas.
Data sheet
- Colour
- Coarse stainless steel
- Salt fog corrosion
- 350 h
- Application
- Brush, airless or spray gun
- Theoretical yield
- Aerosol: 2 m2 Bulk: 6 to 8 m2
- Dilution
- PI solvent. Maximum 10 %.
- Touch-drying
- 10 minutes at 20 ºC
- Repainting
- Minimum 12 hours at 20 ºC
- Resistance of paint to heat
- 300 ºC