

It is an antioxidant coating formulated for cold galvanising. It acts as an antirust and anticorrosive primer and provides a high temperature resistant finish.
It is an antioxidant coating formulated for cold galvanising. It acts as an antirust and anticorrosive primer and provides a high temperature resistant finish.
Any type of metallic surface to be protected by cold galvanising. Suitable for all kinds of painting machinery immediately after painting, and is also a great protective film in marine and industrial environments.
Metallic constructions, retouching of metal components, doors and fences, industrial vehicles, plastics, welding joints, DIY...
Apply on clean and dry surfaces. Remove embedded dirt and rust residues by brushing using steel rakes. Apply one or two thin coats of GALVIT. It is advisable to apply thin coats rather than a single thick coat. Can be repainted after 10 minutes. Shake the aerosol before use, about one minute after hearing the mixer noise.
Place the spray upside down to purge the valve after use, replace the diffuser if clogged. Do not apply to equipment while plugged in and use in well ventilated areas.