Kalcide

KALCIDE

It is a bactericidal and fungicidal disinfectant detergent with virucidal efficacy, especially against encapsulated viruses, ready for use. The application of the product in the food industry should be carried out in the absence of food. Usage by professional personnel and the general public.

• Cleans and disinfects in a single operation.
• Registered in the Pesticide Register of the Ministry of Health under number: 20-20/40-10634 and number: 20-20/40-10634-HA.
• Approved bactericide effectiveness tests according to UNE-EN 13697 in dirty conditions. Antiseptics and chemical disinfectants. Quantitative non-porous surface test procedure for bactericidal and fungicidal evaluation of chemical disinfectants used in foodstuffs, in industry, in the home and in the community.
• Passed bactericide effectiveness tests according to UNE-EN 13697 standard for specific purposes with the test procedure microorganisms Salmonella typhimurium and Listeria monocytogenes.
• Passed virucidal efficacy tests according to NF-EN 14476 standard in dirty conditions against Adenovirus type 5, Norovirus murino.
• Included in the list of virucidal products authorized in Spain by the Ministry of Health.

Application Areas

Public and private fields, in the food industry and community catering, wherever maximum hygienic quality is required (workrooms, utensils, trays and food transport elements, surfaces in rooms, kitchens, toilets and bathrooms, and all types of surfaces in places of public concurrence, including furnishings).

Instructions for use

Apply the pure product with a trigger sprayer (at a distance of 20 cm), by immersion and/or washing with a cloth. Leave to act for a few minutes (at least 5 min.) and wipe with a scouring pad, cloth or paper to remove any remaining soiling or contamination. If necessary, repeat the operation. It can also be used diluted in water at 5-10%, applied by mop, scouring pad or cloth, for cleaning less compromised or contaminated surfaces such as floors, tiles, etc. during daily maintenance.

A pre-treatment test is recommended to verify the compatibility of the product with the materials. Treated or exposed surfaces that will come into contact with people or food should be rinsed with drinking water.