Super Coolant Multimetal
It is a semi-synthetic cutting fluid, suitable for difficult machining operations. Offers an excellent cooling and detergent effect, effectively combined with optimum lubricating properties.
SUPER COOLANT MULTIMETAL
It is a semi-synthetic cutting fluid, suitable for difficult machining operations. Offers an excellent cooling and detergent effect, effectively combined with optimum lubricating properties.
- Great lubrication and cooling power.
- Free from nitrites, secondary amines, chlorine, formaldehyde releasing agents, and boric acid.
- Excellent anti-corrosive properties. Suitable for hard waters.
Application Areas
Any type of machining of parts: threading, broaching, drilling, reaming, milling, grinding.
Its high detergent capacity and its capacity to remove shaving keeps the system in an optimum state of cleanliness. It can also be used for machining ferrous and non-ferrous materials. Compatible with aluminium, including 6000 and 7000 series aluminium.
Instructions for use
Before using SUPER COOLANT MULTIMETAL, clean the tank with SM CLEAN, diluted with 3 % water.
Once the tank is clean and full of water, pour SUPER COOLANT MULTIMETAL on the water and shake.
We recommend diluting the drill lubricants with automatic dosing equipment/systems. Mixer Type SM 3. Dosatron.
Applying the right dosage saves on final costs and eliminates the environmental impact of the necessary product.
Data sheet
- Appearance
- Brown transparent liquid
- Density (at 20 ºC)
- Typical 1,000 kg/l
- pH 6 %
- 8.7
- Herbert corrosion at 25 ºC 3 %
- 0.0-0
- Analysis Concentration
- Refractometric factor 1.7
- Storage
- Protect from freezing