SM Filtros

It is a product specially designed to favor the neutralization of charges and aggregation of glass particles from the glass machining process that are present in the cooling fluid, in order to effectively separate them by means of filtering systems, obtaining a significant reduction in the load of suspended and colloidal solids and, as a consequence, a fluid with very low turbidity.

  • 10L plastic container
  • 25L plastic container

SM FILTROS

It is a product specially designed to favor the neutralization of charges and aggregation of glass particles from the glass machining process that are present in the coolant fluid, in order to effectively separate them by means of filter media purification systems, obtaining a significant reduction in the load in suspended and colloidal solids and, as a consequence, a fluid with very low turbidity.

  • Increases filtration performance, producing a very low turbidity fluid.
  • Helps the correct preservation of the filter column.
  • It is not corrosive to metals. Compatible with gasket materials.

Application Areas

Glass processing industry with purification systems using filtration equipment.

Instructions for use

Dose the pure product on the water supply to the filtration system, at a point where its correct mixing with the fluid to be treated is ensured.

The appropriate dosage should be adjusted in the installation, depending on the load of solids present, work regime, existing filtration system, etc.

As an orientative dose, for an installation of 10,000 liters of volume, it is recommended to apply between 40 and 60 gr per discharge, or about 250 - 500 gr per day.

Data sheet

Appearance
Clear blue liquid
Odor
Characteristic
pH (at 20ºC)
Typical 7,5
Density (at 20 ºC)
Typical 1,00 kg/l

Specific References

Request safety data sheet:

Name

<p>Terms and Conditions: <a href="http://kalonquimica.com/content/3-terminos-y-condiciones-de-uso">Terminos y condiciones:</a></p>