Symfects

SYMFECTS

It is a fungicidal, bactericidal detergent suitable for cleaning and disinfection in a single stage on any type of surfaces and equipment, as well as in the food industry. Suitable for application by spraying systems, manual application and immersion. High detergent and degreasing power. Use by professional personnel only.

• Registered in the Pesticide Register of the Ministry of Health No: 20/40-02991; No: 20/40-02991 - HA
• Approved bactericide effectiveness tests according to UNE-EN 13697 Standard in dirty conditions against microorganisms: Escherichia coli, Staphylococcus aureus, Pseudomonas aureginosa, and Enterococcus hirae.
• Approved fungicide effectiveness tests according to UNE-EN 13697 in dirty conditions against microorganisms: Candida albicans and Aspergillus niger.

Aplication Areas

Institutions and communities: Public buildings, hotels, gyms, locker rooms, showers, bathrooms, restaurants, cafeterias, etc. For cleaning and disinfection of floors, surfaces, walls.

Food industry in general for cleaning and disinfection of floors, surfaces, walls, etc.

General industry for cleaning and disinfection of floors, surfaces, walls, vehicle interiors.

Instructions for use

Spraying: Dilute with water at a dose between 1 and 5%, depending on the degree of soiling. Apply with manual spray gun, knapsack sprayer or spraying system, leave to act for 15 minutes. Subsequently, rinse with water (in the case of Food Industry, of potable quality).

Manual cleaning: Remove coarse dirt with a cloth. Dilute with water at a dosage between 1 and 5%, depending on the degree of soiling. Wet the surface to be cleaned. Use a scouring pad or brush to rub until the visible dirt is removed. Leave to act for 15 minutes. Subsequently rinse with water (in the case of Food Industry, of potable quality).

Immersion: Dilute with water at a dose between 1 and 5%, depending on the degree of dirt. Wet the objects to be cleaned and rub with a scouring pad until visible dirt is removed. Soak the utensils and let it act for 15 minutes. Remove the pieces and rinse them with plenty of water (in the case of Food Industry, of potable quality).

Do not use on soft metals (aluminum or galvanized). Do not mix with other chemical products.