SM 400

SM 400

It is an effective corrosion and deposits inhibitor, especially indicated for the protection of semi-open cooling circuits (cooling towers, evaporative condensers, etc.). Its corrosion inhibiting effect lies in its ability to form a protective coat on the metallic surface that prevents corrosion from developing. On the other hand, its sequestering and dispersing capacity makes it an effective scale inhibitor, enabling work at higher concentration cycles, increasing performance.

• • Exceptional protection against corrosion and deposit formation, especially where high concentration cycles and/or high saturation rates are used.
  • Compatible with all types of biocides (oxidising and non-oxidising) at use doses.
  • Liquid product, easy handling and dosing control.

Application Areas

Semi-open cooling systems (cooling towers, evaporative condensers, ...).

Instructions for use

Dose the product on the water supply to the cooling system, depending on the inlet flow rate. It is recommended to maintain between 100 - 200 mg/l of SM 400 in the circuit water.

Calculation of the dosage on the supply water:

Litres SM 400/hour = Water flow rate (litres/hour) x 150 mg/l / No. of concentration cycles x 1200 g/l x 1000 mg/g<

Use in combination with the biocide treatment product against legionella SM ALGAE CIR.