Super Coolant

It is a synthetic coolant, suitable for low harshness grinding and machining. Combines excellent cooling and anti-corrosion effect with minimal foaming.

  • 10L plastic container
  • 25L plastic container
  • 210L metallic drum
  • 50L metal drums

SM COOLANT 

It is a synthetic coolant, suitable for low harshness grinding and machining. Combines excellent cooling and anti-corrosion effect with minimal foaming.

    • Cools, lubricates and prevents corrosion.
    • Does not contain nitrites, secondary amines, chlorine or mineral oils.
    • Remains highly stable against bacterial contamination.
    • Concentrated formula: supports high dilutions. Increases tool life and provides a cleaner cut.
    • Excellent anti-corrosive properties. Suitable for hard waters.

Application Areas

Any grinding and lapping operation on cast iron and steel.

Mineral oil free to avoid clogging of grinding wheels.

Easy visualisation of the operation, low foaming. Easy shaving decanting, compatible with paper belt shaving filter.

Instructions for use

Before using SM COLLANT, it is advisable to clean the tank with SM CLEAN, diluted with 3 % water. When the tank is clean and full of water, pour SM COOLANT on the water and shake.

Machining

Recommended dilution

Metal cutting

5% - 6%

Grinding

4% - 6%

We recommend diluting the drill lubricants with automatic dosing equipment/systems. Mixer type SM 3 or Dosatron.

Applying the right dosage saves on final costs and eliminates the environmental impact of the necessary product.

Data sheet

Appearance
Yellow transparent liquid
Density (at 20 ºC)
Typical 1,080 kg/l
pH 6 %
9.1
Herbert corrosion at 25 ºC 3 %
0.0-0
Analysis Concentration
Refractometric factor 2
Storage
Protect from freezing

Specific References

Request safety data sheet:

Name

<p>Terms and Conditions: <a href="http://kalonquimica.com/content/3-terminos-y-condiciones-de-uso">Terminos y condiciones:</a></p>