SM Inox P

SM INOX P

It is a powerful stainless steel passivating and descaling agent, indicated to promote and increase the thickness of the material's passive layer.

• • Passivates stainless steel surfaces.
  • Promotes the formation of the passive layer.
  • Descaling action in heat exchangers.
  • Effective in cleaning and passivation of stainless steel welds.

Application Areas

Restoration of stainless steel, by passive layer formation.

Cleaning and removal of deposits on stainless steel and titanium plate heat exchangers. Copper cleaning, restores the original appearance by removing the surface layer.

Cleaning and passivation of stainless steel pipe welds.

Instructions for use

As passivating agent: Apply the product undiluted, deeply soaking the surface, by means of a cloth or brush, at a temperature of 21 ºC (room temperature) and keep it for a contact time between 20 and 60 minutes, to achieve a complete passivation. Then rinse thoroughly with demineralised water for at least 2 minutes. Wear safety gloves/goggles.

As descaling agent: Prepare a 5-10 % dilution and recirculate for at least 1 hour. Drain and then rinse with water until the pH values of the circuit water and the supply water are the same.