RDS
It is a high performance dry demoulding agent. Its demoulding film hardens when heated and provides optimum results.
RDS
It is a high performance dry demoulding agent. Its demoulding film hardens when heated and provides optimum results.
- Demoulds polyester polyurethane elastomer in liquid and solid form.
- Allows repeated demoulding.
- High temperature resistance, up to 400 ºC
- High anchoring power.
- Excellent surface finishes.
Application Areas
RDS is formulated for high performance demoulding of synthetic resins, rigid polyurethane foam, polyester polyurethane elastomers. Withstands temperatures up to 400 ºC. Suitable for repeated demoulding due to the excellent adhesion of its waxy layer.
RDS is especially recommended in mould workshops for the ceramics industry, rubber industry, etc.
Instructions for use
The surface must be clean and dry.
Shake the container vertically and apply a thin layer.
Subsequently, heat the mould to a temperature of approximately 110 ºC for 5 minutes to promote curing of the release agent on the mould surface.
Perform the polymer injection process and demoulding.
Data sheet
- Appearance
- Clear liquid
- Odor
- Paraffinic solvent
- Colour
- Colorless