SM Bumper

It is a coating rich in Zinc and Aluminum, formulated for cold galvanizing. Its effectiveness and versatility make it a perfect antioxidant and anticorrosive primer with an impeccable aluminum-color finish, resistant to high temperatures.

  • Boxes of 12 aerosols of 400ml/unit

SM BUMPER

It is a flexible and textured acrylic coating, black in color, recommended for the protection and decoration of plastic bumpers on vehicles. Its finish imitates that of the original bumpers. It can also be used as a bonding primer for plastics. Repaintable with acrylic finishes.

  • Great flexibility.
  • High adhesion.
  • Excellent covering power.

Application Areas

Automotive and industry in general.

Instructions for use

The surface must be clean, dry and free of grease.

Shake the container well until you hear the mixing balls knocking inside. With the container in a vertical position, apply a thin, homogeneous layer on the surface to be treated, from a distance of 15 cm. approximately.

After application, invert the container and press a few times to clean the valve.

Data sheet

Performance
2 m2 per spray
Brightness
Mate
Touch dry ISO 1517
20 minutes
Secado total: ISO 1517
4 hours
Application conditions
Minimum ambient temperature: 8ºC
Application conditions
Minimum surface temperature: 5ºC
Application conditions
Maximum humidity: 85% R.H.P.

Specific References