Morstrip SC

MORSTRIP SC

It is a product with gel aspect specially formulated for the stripping of all types of paints applied on vertical surfaces, avoiding possible drips or spills. Its methylene chloride free formula makes it safe for use by the operator and environmentally friendly.

• Highly effective and fast-acting paint stripper.
• Removes all types of paints: acrylic, epoxy, polyurethane, polyamide.
• Compatible with a wide variety of materials: stone, plaster, glass, wood, ferrous and light metals, some types of plastics.
• Easy to apply, avoiding unhooking.
• It is not harmful to operators or the environment.

Application Areas

General industry: stripping of all types of paints, oil stains, rubber, ink and varnish on a multitude of supports of different materials such as stone, plaster, glass, wood, ferrous or light metals and on a wide variety of plastics, with the exception of polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS) and polyacrylate (PMMA). All types of machinery that cannot be pickled by immersion due to its dimensions.

Instructions for use

Manual application:

Apply a thick coat of the pure product by brush, spatula, brush or roller, at room temperature. Leave to act for approximately 20 minutes and then remove with a spatula.

If you want to paint the surface afterwards, it must be very clean and dry.

Rinse the tools used to apply the product with water.

NOTES:

It is advisable to carry out an initial test on the surface.

On wood it may be convenient to neutralize.

In case of application on metallic surfaces, rinse well with water to avoid oxidation.